The Weekly is STREAMING now. Join us at HorizonTV

What Builders Should Know About Surfactants and Building Wrap

Sponsored content
December 16, 2020 |
Bijan Mansouri, TYPAR

Among the many performance characteristics to consider when choosing a building wrap, surfactant resistance is one that can be easily overlooked. However, builders and contractors who do not have at least a basic understanding of surfactants and how they impact the performance of building wrap could potentially jeopardize the long-term durability of the exterior wall assembly. 

What Are Surfactants?

Surfactants (surface active agents) are contaminants that lower the surface tension of a liquid thereby allowing it to penetrate the housewrap material. Water soluble extractives such as tannins and wood sugars commonly found in redwood and cedar cladding products are examples of surfactants that contaminate the surface of building wraps. Even more, surfactants can be found in detergents, soaps and other cleaning solutions used to power wash siding, making surfactants almost impossible to avoid.


Metro Wrap

The Problem with Surfactants 

Surfactants promote the loss of water repellency, causing “wetting” of the building wrap surface. When this occurs, water can more easily pass through the microscopic openings in the building wrap. Once moisture finds its way into the building envelope, it can promote the growth of mold and rot that not only cause structural damage but also pose serious health hazards to building occupants.

The Solution 

When choosing a building wrap, be sure to pay attention to its surfactant resistance capabilities. Not all wraps will provide the same surfactant protection—if any at all. On the other end of the spectrum are building wraps like TYPAR MetroWrap and Drainable Wrap that are engineered with a specialized coating that resist surfactants. 

Beyond product selection, there are several installation best practices contractors and builders can adhere to in an effort to decrease the potential of surfactant-related issues.Renowned building scientist, Joseph Lstiburek, suggests several steps to prevent surfactants from reaching the building wrap material, including back-priming wood clapboards and trim and creating an air space between the cladding and building wrap.  

Due to the vast amount of building wraps and moisture management products on the market, it is more imperative than ever that builders and contractors have the knowledge to make the right product selections to design and build wall systems that perform to today’s standards of high performance, durability and moisture control.

Bijan Mansouri - Typar
Bijan Mansouri, TYPAR

Bijan Mansouri is the technical manager at TYPAR Construction Products. He has been with Berry Plastics for more than 25 years working in different technical capacities. He is responsible for Building code requirements, designing and development of new construction products, training builders and architects on application of new and existing products and creating and education on the proper practice and installation of building envelope. He can be reached at

Overlay Init

Your card will be charged: 0