flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Metl-Span Stands Tall for Amazon Fulfillment Center

Sponsored Content

Metl-Span Stands Tall for Amazon Fulfillment Center

Insulated Metal Panels Deliver Perfect Configuration, Preferred Performance


By METL-SPAN | August 17, 2020

The Amazon fulfillment center near Spokane, Wash., is one of many centers across the country for the e-commerce giant where products are stored and then shipped to consumers who have made purchases through their online platform. As many as 1,500 employees work alongside robots to confirm orders, get them loaded onto trucks and then send them out the door to their final destination. 

The 750,000-square-foot facility has four floors.

During the planning phases for the massive structure, architects and designers realized they had a large area to cover when it came to the exterior walls. 

Metl-Span insulated metal panels became the preferred solution.

 

From Floor to Ceiling

 

At the outset, architects knew they needed to achieve uniformity in look for the building’s exterior, a request that came from the building owner.

“[Amazon] wanted a single product that went from the top of the concrete footing up to the roofline,” said Bill Thordarson, regional manager, Bain Associates, which served as the manufacturer’s representative on the project. “That’s about 50 feet.”

Contractors installed nearly 10,000 square feet of Metl-Span CF Mesa insulated metal panels. The lightly corrugated profile on both faces of the panel created symmetry on the outside of the building. The panels spanned between 42 and 49 feet in length. 

To create the right design aesthetic, architects chose four different colors for the panels – Polar White, Sandstone, Zinc Gray and Smoke Gray.

“With the ability to choose different colors, the building avoids a monochromatic look,” Thordarson added. “It has some texture and aesthetic quality to it.”

The CF Mesa panels are manufactured with an offset double tongue-and-groove system, allowing the panels to slide into each other for ease and efficiency in installation. 

In addition, the panels are only fastened on one side, which allows for a concealed system.  

This versatility added to the visual appeal of the building’s exterior wall, creating a seamless flow from panel to panel.

 

 

Running Hot and Cold

 

As an insulated metal panel, CF Mesa panels are manufactured with foamed-in-place insulation. The panels deliver optimal thermal performance, another mandate when constructing the Amazon fulfillment center in the kind of climate experienced by Spokane, Wash. 

“It gets superhot in the summer and supercold in the winter,” Thordarson remarked. “The beauty of the foam-insulated panels is that you’re also achieving a superhigh R value, so you don’t have to worry about insulating the inside of the building.”

CF Mesa panels are ideal in cold storage applications such ascooler buildings, freezers, food processing buildings, dry goods warehouses, and any structure where temperature control and insulation values are critical.


Economic Driver

 

Opened in June 2020, the Amazon fulfillment center outside Spokane has spurred additional development in the area.

During peak holiday periods, the facility employs as many as 3,000 people.

 

Metl-Span
1720 Lakepointe Drive Suite 101
Lewisville, Texas 75057 
877.585.9969 
www.metlspan.com
info@metlspan.com

 

Tags

Related Stories

Products and Materials | Mar 31, 2024

Top building products for March 2024

BD+C Editors break down March's top 15 building products, from multifamily-focused electronic locks to recyclable plastic panels.

75 Top Building Products | Dec 13, 2023

75 top building products for 2023

From a bladeless rooftop wind energy system, to a troffer light fixture with built-in continuous visible light disinfection, innovation is plentiful in Building Design+Construction's annual 75 Top Products report. 

Products and Materials | Oct 31, 2023

Top building products for October 2023

BD+C Editors break down 15 of the top building products this month, from structural round timber to air handling units.

Metals | Oct 11, 2023

Tremco CPG Inc. Announces Acquisition of First US Fabricator of Tested, Certified IBC Compliant MCM Panels

Tremco CPG Inc. (“Tremco”) today announced the acquisition of the wall system fabrication segment of NOW Specialties, LLC (“NOW”). Located in Carrollton, Texas, NOW is a leading panel wall system fabricator specializing in Metal Composite Material (MCM) and Aluminum Composite Material (ACM) panels. The installation side of the business was not acquired and continues to operate as NOW Specialties.

Metals | Sep 11, 2023

Best practices guide for air leakage testing for metal building systems released

The Metal Building Manufacturers Association (MBMA) released a new guidebook, Metal Building Systems - Best Practices to Comply with Whole-Building Air Leakage Testing Requirements.

Metals | Aug 24, 2023

METALCON Announces The Architect’s Experience

The Architect’s Experience at METALCON ― the only global event dedicated exclusively to the application of metal in design and construction ― announces special programming for design professionals at this year’s show beginning on Wednesday, Oct. 18 at the Las Vegas Convention Center.

75 Top Building Products | Aug 7, 2023

Enter today! BD+C's 75 Top Building Products for 2023

BD+C editors are now accepting submissions for the annual 75 Top Building Products awards. The winners will be featured in the November/December 2023 issue of Building Design+Construction. 

Building Materials | Jun 14, 2023

Construction input prices fall 0.6% in May 2023

Construction input prices fell 0.6% in May compared to the previous month, according to an Associated Builders and Contractors analysis of the U.S. Bureau of Labor Statistics’ Producer Price Index data released today. Nonresidential construction input prices declined 0.5% for the month.

Metals | Apr 19, 2023

Sherwin-Williams Coil Coatings releases new color forecast for architectural metal coatings

The Coil Coatings division of Sherwin-Williams has released its latest color forecast, FUSE, for architectural metal coatings. The report aims to inspire architects, product manufacturers and original equipment manufacturers (OEMs) in the coil and extrusion market over the next 3-5 years and beyond.  

Sponsored | Metals | Apr 10, 2023

Transformative Sustainable Redesign for the Bright Minds of the Future

Without interrupting the academics of students at Fleming College, the team at Gow Hastings Architects modernized this decades-old campus building. The new energy-efficient A-Wing is a revelation in sustainability with a gorgeous design centered on natural light and openness made possible with ALPOLIC metal composite materials. 

boombox1 - default
boombox2 -
native1 -

More In Category




Metals

Tremco CPG Inc. Announces Acquisition of First US Fabricator of Tested, Certified IBC Compliant MCM Panels

Tremco CPG Inc. (“Tremco”) today announced the acquisition of the wall system fabrication segment of NOW Specialties, LLC (“NOW”). Located in Carrollton, Texas, NOW is a leading panel wall system fabricator specializing in Metal Composite Material (MCM) and Aluminum Composite Material (ACM) panels. The installation side of the business was not acquired and continues to operate as NOW Specialties.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021